- MOTOR DRIVEN DIAPHRAGM TYPE GAS COMPRESSORS

Superpressure Machine
Superpressure

SEVEN MODELS AVAILABLE

P/N 46-13484 6,000 PSI (400 BAR) SINGLE-END

P/N 46-13411-2 10,000 PSI (700 BAR) SINGLE-END

P/N 46-13416-2 30,000 PSI (2000 BAR) SINGLE-END

P/N 46-13487 6,000 PSI (400 BAR) DOUBLE-END

P/N 46-13421-2 10,000 PSI (700 BAR) DOUBLE-END

P/N 46-13429-2 10,000 PSI (700 BAR) TWO-STAGE

P/N 46-13427-2 30,000 PSI (2000 BAR) TWO-STAGE (10-30)

SPECIFICATIONS AND ORDERING DATA
 SINGLE END SINGLE END SINGLE END DOUBLE END* DOUBLE END* TWO STAGE* TWO STAGE*
CATALOG NUMBER 46-13484 46-13411-2 46-13416-2 46-13487 46-13421-2 46-13429 (6-10) 46-13427-2
MAXIMUM WORKING PRESSURE (PSI) 6,000 10,000 30,000 6,000 10,000 10,000 30,000
MINIMUM SUCTION** PRESSURE (PSI) 400 700 2,000 400 700 150 350
PLUNGER DIAMETER (IN.) 3/4 9/16 3/8 3/4 9/16 3/4, 9/16 9/16, 3/8
STROKE, NOMINAL (IN.) 7/8 1-1/16 7/8 7/8 1-1/16 7/8 1-1/16
STROKES PER MINUTE (MAX) 58 58 58 58 58 58 58
VOLUME DISPLACED AT ATMOS. PRESSURE (CU. IN./STROKE) .36 .26 .10 .72 .52 .36 .26
WEIGHT (LB.)
NET/SHIPPING
245/295 238/289 254/305 285/335 270/320 265/315 286/327
OVERALL DIMENSIONS
L x W x H (IN.)
20 x 22 x 19 29 x 22 x 19
MOUNTING DATA 4 HOLES, 9/16 DIAMETER
ON 13 x 14-1/4 INCH CENTERS
MOTOR CHARACTERISTICS 1 HP., 1000 RPM, 230/460 VOLT, 3 PHASE, 60 HZ

EXPLOSION-PROOF

, W/ 58 RPM SPEED REDUCER
PORTS, WORKING FLUID
INLET;OUTLET
1/4 O. D. TUBING ; 1/4 O. D. TUBING
1. 50 Hz motor available at extra cost.
2. Interconnecting tubing supplied with double end and two stage units.
3. Superpressure tubing must be used.

Minimum gas suction pressure indicated is that pressure required to attain the maximum working pressure.
Gas Suction pressure can be as low as 150 psig (minimum required for full diaphragm flexure)
but with appropriate reduced discharge pressure (based on compression ratio or 14 to 1 for each stage.)

See CHECK VALVES - DIAPHRAGM TYPE COMPRESSORS for details on check valves.
    1. All compressors are supplied with a complete set of standard check valves. Use the above chart for replacements or special order only.
    2. Special 1/4 inch NPT.F inlet adapter (Cat. No. 46-16705) available for use on liquid service inlet check valve (Cat. No. 44-14100).
    3.

    Double ball check valves

    are used for particularly difficult to handle liquids and are inter-changeable with check valves furnished for normal liquid service.
    Also used where ultra-pure cleaning is required.
    Specifications subject to change, consult manufacturer.

SPECIFICATIONS AND ORDER INFORMATION

Catalog Number Product Name Product Description Add To Cart
46-13411-210,000 psi (700 bar) Single-End UnitNot Available  Add To Cart
46-13416-230,000 psi (2000 bar) Single-End UnitNot Available  Add To Cart
46-13421-210,000 psi (700 bar) Double-End UnitNot Available  Add To Cart
46-13427-230,000 psi (2000 bar) Two-Stage Unit (10-30)Not Available  Add To Cart
46-13429 (6-10)10,000 psi (700 bar) Two-Stage Unit (6-10)Not Available  Add To Cart
46-134846,000 psi (400 bar) Single-End UnitNot Available  Add To Cart
46-134876,000 psi (400 bar) Double-End UnitNot Available  Add To Cart